45
Set Patrol Sequence
Set Patrol
Sequence
This feature determines how the camera will move when it is
set to "Rotate". You can set a number of Preset Positions; the
camera will go to the first position, then move through the list
of present positions until it is finished. The camera will stop at
the last position in the list.
To create the Preset Sequence, select the desired Preset
Position in the left column, and click the "Add >>" button.
Repeat until the desired sequence is complete. Note that you
can add the same Preset Position more than once; this can be
used to make the camera stay longer at one position.
To delete a position from the Sequence, select the desired
position and click the "Remove" button.
Time
This determines how long the camera will stay at each
position while executing the sequence. Set this to the desired
value.
To Next Page
Loading...
