User’s Manual
WAB-3003 108M 11g Outdoor PoE CPE/ AP/ Bridge
17
Step 5
: Security Settings
Click on the Wireless button and then select the Security tab.
Select the desired VAP Profile and Security Type from the drop-down list boxes. The above
figure depicts an example of selecting VAP-1 and WEP.
Enter the information required in the blank fields.
Caution:
You must use the same information provided here to configure the network devices that are to
be associated with WAB-3003.
Click SAVE to save all settings configured so far;
all updated settings will take effect upon reboot.
Congratulations!
The AP mode is now successfully configured.
To Next Page
Loading...
