Lexicon MPX G2 User Guide

9-19
MPX G2 Program Descriptions
Programs 145-149 are set up to have the MPX G2 front panel buttons or the MPX R1
control:
Tap = Record Loop
A/B = Layer
Delay = Clear Loop
145 Jam 1 S&H+
Loads with a Sample & Hold style effect. The MPX R1 Toe Switch activates pedal control
of volume.
146 Jam1Cordovox
The MPX R1 Toe Switch turns the Cordovox effect on and off, the pedal controls the
Cordovox speed. Press Gain for Overdrive.
147 Jam1 Uni+
Loads with Univybe. Press Gain for overdrive. The MPX R1 Toe Switch activates pedal
control of volume or wah.
Programs 148-149 are set up to have the MPX G2 front panel buttons or the MPX R1
control:
Tap = Record Loop
A/B = Replace
Delay = Start/Stop Loop
148 Jam 2 Pitch+
Loads with Distortion and Pitch. The MPX R1 Toe Switch swaps pedal controls between
volume (Toe Switch off) and pitch (Toe Switch on).
149 Jam 2 Flange+
Loads with a Jet Flange. Press Gain for Screamer. The MPX R1 Toe Switch activates
pedal control of volume or wah.
JamMan
(Amp Input Only)

Lexicon MPX G2 Specifications

General

Brand	Lexicon
Model	MPX G2
Category	Recording Equipment
Language	English