Menu item Description
Quiet Mode
Off (Image/Photo)
On (Text/Graphics)
Reduces the amount of noise produced by the printer
Notes:
• Off is the factory default setting. This setting supports the
performance specifications for your printer.
• On configures the printer to produce as little noise as possible.
This setting is best suited for printing text and line graphics.
• For optimal printing of color-rich documents, set Quiet Mode
to Off.
• Selecting Photo from the driver may disable Quiet Mode and
provide better print quality and full speed printing.
Run Initial Setup
Yes
No
Instructs the printer to run the setup wizard
Notes:
• Yes is the factory default setting.
• After completing the setup wizard by selecting Done at the
Country select screen, the default becomes No.
Paper Sizes
US
Metric
Notes:
• The initial setting is determined by your Country selection in
the initial setup wizard.
• Changing this setting also changes the Units of Measurement
setting in the Universal Setup menu and the default for each
input source in the Paper Size/Type menu.
Alarms
Alarm Control
Cartridge Alarm
Sets an alarm to sound when the printer requires operator
intervention
Available selections for each alarm type are:
Off
Single
Continuous
Notes:
• Single is the factory default setting for Alarm Control. Single
sounds three quick beeps.
• Off is the factory default setting for Cartridge Alarm. Off
means no alarm will sound.
• Continuous repeats three beeps every 10 seconds.
Understanding printer menus
111
To Next Page
Loading...
Need help?
General
