Supplies menu
Supplies menu
Menu item Description
Replace Supply
All
Cyan Photoconductor
Magenta Photoconductor
Yellow Photoconductor
Black Photoconductor
Provides the option to reset the supply counter for the
photoconductor just replaced, or for all photoconductors
Select the photoconductor, and then select Yes or No:
• Select Yes to reset the supply counter.
• Select No to exit.
Note: A supply counter must be reset manually after a
photoconductor is replaced.
Cyan, Magenta, Yellow, or Black Cartridge
Early Warning
Low
Invalid
Replace
Missing or Defective
OK
Unsupported
Shows the status of the toner cartridges
Cyan, Magenta, Yellow, or Black Photoconductor
Early Warning
Low
Replace
Missing
OK
Shows the status of the photoconductors
Waste Toner Box
Near Full
Replace
Missing
OK
Shows the status of the waste toner box
Fuser
Early Warning
Low
Replace
Missing
OK
Shows the status of the fuser
Transfer module
Early Warning
Low
Replace
Missing
OK
Shows the status of the transfer module
Understanding printer menus
79
To Next Page
Loading...
Need help?
General
