Custom Types menu
Menu item Description
Custom Type <x>
Paper
Card Stock
Glossy
Transparency
Labels
Vinyl Labels
Envelope
Associates a paper or specialty media type with a Custom Type <x> name
or a user-defined Custom Name created from the Embedded Web Server or
MarkVision
TM
Professional
Notes:
• Paper is the factory default setting.
• The custom media type must be supported by the selected tray or
multipurpose feeder in order to print from that source.
Recycled
Paper
Card Stock
Glossy
Transparency
Labels
Vinyl Labels
Envelope
Specifies the recycled paper type loaded in a tray. This will also be the Recycled
setting in other menus.
Notes:
• Paper is the factory default setting.
• The custom media type must be supported by the selected tray or
multipurpose feeder in order to print from that source.
Universal Setup menu
These menu items are used to specify the height and width of the Universal Paper Size. The Universal Paper Size is a
user-defined paper size setting. It is listed with the other paper size settings and includes similar options, such as
support for duplex printing and printing multiple pages on one sheet.
Menu item Description
Units of Measure
Inches
Millimeters
Identifies the units of measure
Notes:
• Inches is the US factory default setting.
• Millimeters is the international factory default setting.
Portrait Width
3–8.5 inches
76–216 mm
Sets the portrait width
Notes:
• If the width exceeds the maximum, then the printer uses the
maximum width allowed.
• 8.5 inches is the US factory default setting. Inches can be increased
in 0.01-inch increments.
• 216 mm is the international factory default setting. Millimeters can
be increased in 1-mm increments.
Understanding printer menus
89
To Next Page
Loading...
Need help?
General
