37 Insufficient memory to collate job
Try one or more of the following:
• Press the up or down arrow button until
Continue appears, and then press to print the portion of the job
already stored and begin collating the rest of the print job.
• Cancel the current print job. Press the up or down arrow button until Cancel job appears, and then press
.
37 Insufficient memory, some held jobs were deleted
The printer deleted some held jobs in order to process current jobs.
Press the up or down arrow button until
Continue appears, and then press to clear the message.
37 Insufficient memory, some held jobs will not be restored
The printer was unable to restore some or all of the confidential or held jobs on the printer hard disk.
Press the up or down arrow button until
Continue appears, and then press to clear the message.
38 Memory full
Try one or more of the following:
• Press the up or down arrow button until
Continue appears, and then press to clear the message.
• Cancel the current print job. Press the up or down arrow button until Cancel job appears, and then press
.
• Install additional printer memory.
39 Complex page, some data may not have printed
Try one or more of the following:
• Press the up or down arrow button until
Continue appears, and then press to clear the message and
continue printing.
• Cancel the current print job. Press the up or down arrow button until Cancel job appears, and then press
.
• Install additional printer memory.
51 Defective flash detected
• Press the up or down arrow button until
Continue appears, and then press to clear the message and
continue printing.
• Cancel the current print job.
Troubleshooting
166
To Next Page
Loading...
Need help?
General
