When 80 Replace Fuser or 83 Replace Transfer Module appears, install the new fuser or the new
transfer module. For installation information, see the documentation that came with the part.
Part name Part number
Fuser 40X5095 (100 volt)
40X5093 (115 volt)
40X5094 (230 volt)
Transfer Module 40X5096
Ordering a waste toner box
When 82 Waste toner box nearly full appears, order a replacement waste toner box. When 82 Replace
waste toner box appears, you must replace the waste toner box.
Note: Waste toner box reuse is not recommended.
Part name Part number
Waste Toner Box C734X77G
Replacing supplies
Replacing a toner cartridge
When 88 Replace <color> cartridge, 88 <color> cartridge nearly low, or 88 <color>
cartridge low appears on the printer control panel, or when print becomes faded, try to extend the life of the
specified cartridge.
1 Open the front door.
Warning—Potential Damage: Make sure the printer is not open for 10 minutes or more to avoid overexposing
the photoconductor units to light.
Maintaining the printer
136
To Next Page
Loading...
Need help?
General
