Setup menu
Menu item Description
Printer Language
PCL Emulation
PS Emulation
Sets the default printer language
Notes:
• PCL emulation uses a PCL interpreter for processing print
jobs. PostScript emulation uses a PS interpreter for processing
print jobs.
• PCL is the factory default printer language.
• Setting a printer language as the default does not prevent a
software program from sending print jobs that use another
printer language.
Job Waiting
On
Off
Specifies that print jobs be removed from the print queue if they
require unavailable printer options or custom settings. They are
stored in a separate print queue, so other jobs print normally.
When the missing information and/or options are obtained, the
stored jobs print.
Notes:
• Off is the factory default setting.
• This menu appears only if a non-Read Only printer hard disk
is installed. This requirement ensures that stored jobs are not
deleted if the printer loses power.
Print Area
Normal
Whole Page
Sets the logical and physical printable area
Notes:
• Normal is the factory default setting. When attempting to
print data in the non-printable area defined by the Normal
setting, the printer clips the image at the boundary.
• The Whole Page setting allows the image to be moved into
the non-printable area defined by the Normal setting, but the
printer will clip the image at the Normal setting boundary.
• The Whole Page setting affects only pages printed using a
PCL 5e interpreter. This setting has no effect on pages printed
using the PCL XL or PostScript interpreter.
Printer Usage
Max Yield
Max Speed
Sets the printer for a faster print speed or a higher toner yield.
Note: Max Yield is the factory default setting.
Black Only Mode
Off
On
Sets the printer to print text and graphics using only the black
toner cartridge.
Note: Off is the factory default setting.
Understanding printer menus
114
To Next Page
Loading...
Need help?
General
