Menu item Description
Font Priority
Resident
Flash/Disk
Establishes the font search order
Notes:
• Resident is the factory default setting.
• A formatted flash memory option card or printer hard disk must be
installed in the printer and operating properly for this menu item to be
available.
• The flash memory option or printer hard disk cannot be Read/Write, Write,
or password protected.
• Job Buffer Size must not be set to 100%.
Image Smoothing
On
Off
Enhances the contrast and sharpness of low-resolution images and smooths
their color transitions
Notes:
• Off is the factory default setting.
• Image Smoothing has no effect on images that are 300 dpi or higher in
resolution.
PCL Emul menu
Menu item Description
Font Source
Resident
Disk
Download
Flash
All
Specifies the set of fonts used by the Font Name menu item
Notes:
• Resident is the factory default setting. It shows the factory default set of
fonts downloaded into RAM.
• Flash and Disk settings show all fonts resident in that option.
• Flash option must be properly formatted and cannot be Read/Write, Write,
or password protected.
• Download shows all the fonts downloaded into RAM.
• All shows all fonts available to any option.
Font Name
RO Courier
Identifies a specific font and the option where it is stored
Notes:
• RO Courier is the factory default setting.
• RO Courier shows the font name, font ID, and storage location in the
printer. The font source abbreviation is R for Resident, F for Flash, K for Disk,
and D for download.
Understanding printer menus
123
To Next Page
Loading...
Need help?
General
