Use To
Timeouts (Continued)
Print Timeout
Disabled
1–255
Set the amount of time in seconds the printer waits to receive an
end‑of‑job message before canceling the remainder of the print
job.
Notes:
• 90 is the factory default setting.
• When the timer expires, any partially printed page still in the
printer is printed, and then the scanner checks to see if any
new print jobs are waiting.
• Print Timeout is available only when using PCL emulation.
This setting has no effect on PostScript emulation print jobs.
Timeouts (Continued)
Wait Timeout
Disabled
15–65535
Set the amount of time in seconds the printer waits for additional
data before canceling a print job.
Notes:
• 40 is the factory default setting.
• Wait Timeout is available only when the scanner is using
PostScript emulation. This setting has no effect on PCL
emulation print jobs.
Timeouts (Continued)
Job Hold Timeout
5–255
Set the amount of time in seconds the printer waits for user
intervention before it holds jobs that require unavailable resources
and continues to print other jobs in the print queue.
Notes:
• 30 is the factory default setting.
• This menu appears only when a printer hard disk is installed.
Error Recovery
Auto Reboot
Reboot when idle
Reboot always
Reboot never
Max Auto Reboots
1–20
Set the printer to restart when an error is encountered.
Notes:
• “Reboot when idle” is the factory default setting for Auto
Reboot.
• 5 is the factory default setting for Max Auto Reboots.
• If the printer performs a number of automatic reboots that is
the same as the menu setting within a certain amount of
time, then the printer shows the applicable error instead of
restarting.
Print Recovery
Auto Continue
Disabled
5–255
Let the printer automatically continue printing from certain offline
situations when these are not resolved within the specified time
period.
Note: Disabled is the factory default setting.
Understanding the printer menus 106
To Next Page
Loading...
Need help?
General
