Lexmark Forms Printer 4227 Plus - Removing the Tractor 2 Feeder

99
Chapter 5: Printer Options
Printer Options
d
Item
↓ until Tractor appears.
e Next
→.
f
Item
↓ until Tractor 2 appears.
g Store to save the setting.
h
Quit to exit the functions menu.
Removing the Tractor 2 Feeder
To remove the Tractor 2 Feeder and load continuous forms on the normal
tractor feeder:
1 Turn the PC and the printer Off and unplug both.
2 If continuous forms are loaded on the Tractor 2 Feeder, remove the
continuous forms.
3 Press down on the tabs on both sides of the Tractor 2 Feeder. While
holding the tabs down, pull the Tractor 2 Feeder straight out of the
printer.
4
Load continuous forms on the normal tractor feeder. For help, see “To
load continuous forms:” on page 63.
Tab
Tab