Chapter 5: Printer Options
90
Printer Options
14 Insert the Tractor 2 Feeder cable into the clamp, as shown, and snap
the clamp shut.
15
Attach cables removed in previous step.
16 Turn the PC and the printer On after plugging both back in.
See “Loading Paper in the Tractor 2 Feeder” on page 90 for infor-
mation on how to load the Tractor 2 Feeder.
Loading Paper in the Tractor 2 Feeder
The Tractor 2 Feeder has a tractor feeder for continuous forms and a manual
feed tray for single sheets and single-part forms.
This section includes directions for loading both continuous forms in the
Tractor 2 Feeder and single sheet or envelopes in the manual feed tray.
To Next Page
Loading...
