19
Chapter 1: Getting Started
Getting Started
6 2381
7
4226
8 IBM Proprinter III XL
The printer driver you select in your software application must match the
emulation mode you select for your printer. If your software does not allow
you to select the Forms Printer 4227 Printer driver, you may need to
customize your printer for the Epson emulation mode.
Epson Emulation Mode
If your printer is configured for Epson mode, select the Epson
FX-1050 or DFX-5000 printer from the printer selection menu of your
application software.
See your application’s user documentation for more information.
What to do Next
You have completed printer setup. To learn more about your printer, continue
with “Using the Operator Panel” on page 27.
To Next Page
Loading...
