Lexmark Forms Printer 4227 Plus - Setting Autogap; Autogap Set to on; Manual Autogap (Autogap Set to Off)

Chapter 3: Using the Operator Panel
44
Using the Operator Panel
3 Next → twice.
4 Item
↓
or Item
↑
until the value you want appears.
5 Store to save the setting.
6 Quit to exit the function menu.
Setting AutoGap
The AutoGap function determines the amount of space that the printer places between
the printhead and the paper. You can select On, Off, or Single AutoGap from the
function menu.
AutoGap Set to On
When AutoGap is set to On, the printer automatically sets itself to the thickness of the
paper you are using. To set AutoGap On, press:
1 Menu.
2 Item ↓ until AutoGap appears.
3 Next →.
4 Item
↓
or Item
↑
until On appears.
5 Store to save the setting.
6 Quit to exit the function menu.
Manual AutoGap (AutoGap Set to Off)
When AutoGap is Off, you can manually adjust the gap position between the
printhead and the paper. To manually set AutoGap, press:
1 Menu.
2 Item ↓ until AutoGap appears.
3 Next →.