Chapter 4: Selecting and Loading Paper
62
Selecting and Loading Paper
b Move the right paper guide so that it aligns with the right edge of
the envelope.
c Push the envelope in until the Check light stops blinking.
The Paper Empty/Add Paper message disappears.
• If Auto Cut Sheet Load is On (factory default), the paper feeds
automatically to the TOF position. For help, see “Setting Auto
Cut Sheet Load” on page 56.
• If Auto Cut Sheet Load is Off, press FormFeed.
10 Make sure the printer is online (Ready light is on solid). If it is not,
press Start/Stop until the Ready light is on solid. You are now ready to
print.
Note: If the Ready light does not come on solid, make sure that the
media has been inserted far enough into the printer.
Loading Continuous Forms
The printer offers one paper path for continuous forms.
Address added
to show correct
orientation.
To Next Page
Loading...
