Lexmark Forms Printer 4227 Plus - Setting the Printer Online or Offline

41
Chapter 3: Using the Operator Panel
Using the Operator Panel
Setting the Printer Online or Offline
The printer must be online to accept data.
To set the printer:
• Online, press Start/Stop; the Ready light comes on. If paper is not loaded,
the Check light blinks.
• Offline, press Start/Stop; the Ready light goes off.
Interface Options
(continued)
Parity
Does not appear if “Parallel” is
selected for “Interface.”
No, Ignore, Odd, Even
Stop Bits*
Does not appear if “Parallel” is
selected for “Interface.”
*
Appears only if serial is selected as
the interface option.
1, 2**
**Does not appear if
automatic interface
switching is selected
Protocol
Does not appear if “Parallel” is
selected for “Interface.”
XON/XOFF,
Multi XON/XOFF,
DTR Pacing
Honor DSR
Does not appear if “Parallel” is
selected for “Interface.”
On, Off
(RS-232 only)
Polarity
+, - (RS-422 only)
Print Adjust
Adjusts the horizontal
alignment from line to line.
When you select this
function, a series of alignment
patterns prints.
——
Trace Mode
Prints the hexadecimal values
for all data sent to the printer.
—If you enter trace mode in error, you
must turn off the printer to clear the
condition.
—
Main Menu Primary Options Secondary Options