45
Chapter 3: Using the Operator Panel
Using the Operator Panel
4 Item ↓ or Item ↑ until Off appears.
5 Store.
6 Next →.
7 Item
↓
or Item
↑
to select the manual position you want.
8 Store to save the setting.
9 Quit to exit the function menu.
The following table gives the manual setting choices and the information needed to
make the appropriate choice for your paper type.
Manual AutoGap Settings
Paper
Type
Paper
Thickness
Weight of Paper Manual
Setting
Single Forms (Single
Sheets or Continuous
Forms)
Thin 45 g/m
2
(12 lb)
56 g/m
2
(15 lb)
1
Normal 68 g/m
2
(18 lb)
75 g/m
2
(20 lb)
1 or 2
Thick 90 g/m
2
(24 lb) 2
Multiple-Part Forms
When the setting is
4 or higher,
printing speed
becomes slower.
2 Part Form 2 or 3
3 Part Form 3 or 4
4 Part Form 4 or 5
5 Part Form 5 or 6
6 Part Form 5, 6, or 7
7 Part Form 6 or 7
8 Part Form 7
Envelopes 4, 5, or 6
To Next Page
Loading...
