9
Chapter 1: Getting Started
Getting Started
3 Connect the parallel cable. This cable is not supplied with your printer.
An IEEE 1284-compliant parallel cable such as Lexmark part number
1329605 (3.05 m or 10 ft.) or 1427498
(6.1 m or 20 ft.) is recommended.
Note: You do not need to attach a grounding wire to the computer.
4
Fasten the clip wires to the parallel cable. You will hear a click.
5
Connect the other end of the parallel cable to your computer.
6 Continue with “Connecting the Power Cord” on page 11.
To Next Page
Loading...
