Lexmark Forms Printer 4227 Plus - Page 18

Chapter 1: Getting Started
12
Getting Started
2 Press Menu to enter the function menu.
3
Press Item ↓ until Interface Opt. appears on the display.
4 Press Next
→
and the default interface setting appears.
5
To change the default, press Next
→
and then Item
↓
until the
interface option you want appears. Press Store.
Note: You must select Auto or Serial to access serial settings.
6 Press Prev. ← to go back to the interface level.
7
To change the serial settings:
a
Press Item
↓
until Data speed (baud rate) appears.
b Press Next →.
c
Press Item
↓
until the appropriate data speed setting appears.
d Press Store to save the setting. An asterisk (*) appears next to the
setting you selected.
e
Press Prev. ← .
Power
Ready
AutoGap
Tractor2
Check
Interface Opt.
Load
Unload
Start/
Stop
LineFeed FormFeed
Pitch
Item 
Item 
Micro 
Item 
Next 
Micro 
Item 
Prev. 
Font
Item 
Item 
Tear Off
Item 
Store
Menu/
Quit
Item 
Item 
Menu/
Quit