35
Chapter 3: Using the Operator Panel
Using the Operator Panel
Load Macro
Sets up a macro, for which
you designate the settings.
For example, if you are going
to print many documents
using Gothic 12pt with a one-
inch margin, you can use this
function to configure your
printer to use those settings
upon command.
Does not appear if “Disable”
is selected in “Default
Macro”.
Macro
x
(
x
= 1 to 4)
—
Default Macro
Allows you to turn a macro on
or off.
• Macro
x
• Disable
—
Macro
x
Options
(
x
= 1 to 4)
Does not appear if “Disable”
is selected in “Default
Macro”.
Character Options
see below
Paper Handling Options
AutoGap
Copy Macro
x
Allows you to copy the settings of
one macro to another.
Copy FM
a
TO
x
Copy FM
b
TO
x
Copy FM
c
TO
x
Main Menu Primary Options Secondary Options
To Next Page
Loading...
