55
Chapter 4: Selecting and Loading Paper
Selecting and Loading Paper
When you load preprinted forms, put the top of the form in first,
printed side up.
The Paper Empty/Add Paper message disappears.
• If Auto Cut Sheet Load is On (factory default), the paper feeds
automatically to the TOF. To turn Auto Cut Sheet Load On, see
“Setting Auto Cut Sheet Load” on page 56.
For more information about setting TOF, see “Setting TOF for Single
Sheets and Envelopes” on page 70.
• If Auto Cut Sheet Load is Off, press FormFeed.
To load an envelope:
a Place a single envelope against the left paper guide, with the top
edge first, print side up.
Left Paper Guide
Right Paper Guide
To Next Page
Loading...
