65
Chapter 4: Selecting and Loading Paper
Selecting and Loading Paper
9 Set the left margin. Adjust the tractors so that the print start position
you want aligns with the symbol [A printed on the rear plate.
Note: If you make a left margin setting in your application software,
it is added to the left margin setting on the printer.
For example, if you set the left margin at 2.54 cm (1 in.) on the
printer, and also have the left margin set at 2.54 cm (1 in.) in
your application software, the printer begins printing 5.08 cm
(2 in.) from the left edge of the page.
10
Push down the left tractor locking lever to lock the tractor in place.
Remove slack from the paper and lock the right lever.
Printing starts at the
[A
symbol
The distance from the
[A
symbol to the left edge of the
paper determines the width of the left margin.
To Next Page
Loading...
