Chapter 1: Getting Started
2
Getting Started
Lexmark part number 1329605 (3.05 m or 10 ft.) or 1427498 (6.1 m or 20
ft.).
If you need to purchase an RS-232 serial cable, we recommend
Lexmark part number 1038693 (15.3 m or 50 ft.).
2
Place the printer so the front of the printer aligns with the edge of the
desk or table.
Note: If you want to print more than 100 forms, make sure they stack
up below the printer (on the floor) when they are finished
printing to prevent jams.
3
Remove all packing tape from the printer.
4
Pull up the left and right latches on the top cover and lift the top cover
to remove it.
Left Latch
Right Latch
Top Cover
To Next Page
Loading...
