81
Chapter 5: Printer Options
Printer Options
Loading Paper for Automatic Feed
1 If continuous forms are loaded, park them.
For help parking continuous forms, see step 1 of “Parking Contin-
uous Forms and Changing Tractor Feeders” on page 97.
2 Make sure AutoGap is set to On or Single. For help, see “Setting
AutoGap” on page 44.
3
Move the paper select lever up to the single sheet position.
4 Pull the paper supports to the upright position.
5
Pull the locking lever forward to allow paper to be loaded.
6 Place single sheets into the Auto Sheet Feeder.
Note:
• Place letterhead paper with the letterhead facing up and
toward the printer.
• The paper level should not exceed the markings on the
Locking Lever
To Next Page
Loading...
