Lexmark MB2546 - Page 83

Error code Description Action
200.32 Paper fed from tray 3 was detected earlier than
expected at the sensor (input).
See
“Optional tray to sensor (input) jam at leading
edge service check” on page 89.
200.33 Paper fed from tray 3 was detected later than
expected or was never detected at the sensor
(input).
200.34 Paper fed from tray 3 cleared the sensor (input)
earlier than expected.
See
“Optional tray to sensor (input) jam at trailing
edge service check” on page 91.
200.35 Paper fed from tray 3 never cleared the sensor
(input).
200.42 Paper fed from tray 4 was detected earlier than
expected at the sensor (input).
See
“Optional tray to sensor (input) jam at leading
edge service check” on page 89.
200.43 Paper fed from tray 4 was detected later than
expected or was never detected at the sensor
(input).
200.44 Paper fed from tray 4 cleared the sensor (input)
earlier than expected.
See
“Optional tray to sensor (input) jam at trailing
edge service check” on page 91.
200.45 Paper fed from tray 4 never cleared the sensor
(input).
200.91 Paper remains detected at the sensor (input)
after the printer is turned on.
See
“Sensor (input) static jam service check” on
page 92.
MPF to sensor (input) jam at leading edge service check
Action Yes No
Step 1
Make sure that the paper is loaded properly. Use the
recommended paper. See
“Avoiding jams” on page 71.
Does the problem remain?
Go to step 2. The problem is
solved.
Step 2
a Enter the Diagnostics menu, and then navigate to:
Input tray quick print > Tray 1 > Single
b Check if the same error occurs.
Does the same problem remain?
Go to step 10. Go to step 3.
Step 3
Check the MPF pick roller and separator pad for wear and damage.
Are the MPF roller and separator pad free of wear and damage?
Go to step 5. Go to step 4.
7017-2xx, -4xx, -6xx
Diagnostics and troubleshooting
83