Lexmark MS415 - Managing the printer; Finding advanced networking and administrator information; Copying printer settings to other printers; Configuring supply notifications from the Embedded Web Server

2 Firmly grasp the jammed paper on each side, and then gently pull it out.
Note: Make sure all paper fragments are removed.
3 Insert the tray.
4 From the printer control panel, select Next > > Clear the jam, press OK > .
242 paper jam messages
Error code Description Action
242.01 Paper over tray 2 pass thru sensor on warmup. Go to
“Option tray jam service check” on page
63.
242.02 Input sensor detected late feed during a pick retry
from tray 2.
Go to
“Option tray jam service check” on page
63.
242.03 Tray 2 pass thru sensor never became covered when
feeding a sheet from an option below.
Go to
“Option tray jam service check” on page
63.
242.06 Failed to feed from Tray 2.
Paper present sensing indicates media is in the tray.
Go to
“Option tray jam service check” on page
63.
242.09 Tray 2 pick motor lost encoder. Go to
“Option tray jam service check” on page
63.
4514
Diagnostic information
61