Clearing jams in the fuser
If the paper is jammed in the fuser area, Jam at Exit or Jam at Reg. Roll appears. A Jam at Reg.
Roll message indicates the paper is jammed below the fuser. A Jam at Exit message indicates the paper is
jammed above the fuser.
CAUTION—HOT SURFACE: To reduce the risk of injury from a hot component, allow the surface to cool before
touching it.
1 Push the release button, and gently lower the front door.
2 Lift the fuser pressure release levers to release tension on the paper.
Clearing jams
113
To Next Page
Loading...
