3 Press or repeatedly until Scan Defaults appears, and then press OK.
4 Press or repeatedly until Sharpness appears, and then press OK.
5 Press or repeatedly to select the sharpness you want, and then press OK.
6 Press repeatedly until Select Function appears.
Selecting the size of the document being scanned
The Document Size setting defines the size of the original document being scanned.
1 From the printer control panel, press System.
2 Press or repeatedly until Default Settings appears, and then press OK.
3 Press or repeatedly until Scan Defaults appears, and then press OK.
4 Press or repeatedly until Document Size appears, and then press OK.
5 Press or repeatedly to select the paper size you want, and then press OK.
6 Press repeatedly until Select Function appears.
Changing the maximum e-mail size of a scanned image
The Max Email Size setting sets the size limitation for scanned documents. To change the size limit:
1 From the printer control panel, press System.
2 Press or repeatedly until Default Settings appears, and then press OK.
3 Press or repeatedly until Scan Defaults appears, and then press OK.
4 Press or repeatedly until Max Email Size appears, and then press OK.
5 Press or repeatedly to select the file size you want, and then press OK.
6 Press repeatedly until Select Function appears.
Changing the scan destination
1 From the printer control panel, press System.
2 Press or repeatedly until Default Settings appears, and then press OK.
3 Press or repeatedly until Scan Defaults appears, and then press OK.
4 Press or repeatedly until Scan to network appears, and then press OK.
5 Press or repeatedly to select the scan destination you want, and then press OK.
6 Press repeatedly until Select Function appears.
Changing the TIFF format for a scanned image
1 From the printer control panel, press System.
2 Press or repeatedly until Default Settings appears, and then press OK.
Scanning
83
To Next Page
Loading...
