• Photo—Used for photograph prints
1 From the printer control panel, press System.
2 Press or repeatedly until Default Settings appears, and then press OK.
3 Press or repeatedly until Fax Defaults appears, and then press OK.
4 Press or repeatedly until Document Type appears, and then press OK.
5 Press or repeatedly to select the document type you want, and then press OK.
6 Press repeatedly until Select Function appears.
Making a fax lighter or darker
1 From the printer control panel, press System.
2 Press or repeatedly until Default Settings appears, and then press OK.
3 Press or repeatedly until Fax Defaults appears, and then press OK.
4 Press or repeatedly until Lighten/Darken appears, and then press OK.
5 Press or repeatedly to lighten or darken the fax, and then press OK.
6 Press repeatedly until Select Function appears.
Setting the delayed start time
To delay when faxes are sent, set the default time for delayed start faxing (within 24 hours):
1 From the printer control panel, press System.
2 Press or repeatedly until Default Settings appears, and then press OK.
3 Press or repeatedly until Fax Defaults appears, and then press OK.
4 Press or repeatedly until Delayed Start appears, and then press OK.
5 Use the keypad to enter the time, and then press or to move to the next digit. After the time is entered,
press OK.
6 Press repeatedly until Select Function appears.
Customizing the fax settings for an individual fax job
1 From the printer control panel, press Fax.
2 Press or repeatedly until the fax setting you want appears, and then press OK.
3 Change the selected setting, and then press OK.
4 Press or repeatedly until Fax to appears, and then press OK.
Faxing
97
To Next Page
Loading...
