3 Press or repeatedly until Scan Defaults appears, and then press OK.
4 Press or repeatedly until Auto Expo. Level appears, and then press OK.
5 Press or repeatedly until Normal, Higher(1), or Higher(2) appears, and then press OK.
6 Press repeatedly until Select Function appears.
Adjusting the color saturation of a scanned image
1 From the printer control panel, press System.
2 Press or repeatedly until Default Settings appears, and then press OK.
3 Press or repeatedly until Scan Defaults appears, and then press OK.
4 Press or repeatedly until Contrast appears, and then press OK.
5 Press or repeatedly to select the contrast level you want, and then press OK.
6 Press repeatedly until Select Function appears.
Adjusting the image compression of a scanned image
Sets the image compression for scanning. A low compression will result in a higher quality image, but the file size
will be larger. To adjust the image compression:
1 From the printer control panel, press System.
2 Press or repeatedly until Default Settings appears, and then press OK.
3 Press or repeatedly until Scan Defaults appears, and then press OK.
4 Press or repeatedly until Image Compression appears, and then press OK.
5 Press or repeatedly to select the image compression you want, and then press OK.
6 Press repeatedly until Select Function appears.
Adjusting the scan resolution
1 From the printer control panel, press System.
2 Press or repeatedly until Default Settings appears, and then press OK.
3 Press or repeatedly until Scan Defaults appears, and then press OK.
4 Press or repeatedly until Resolution appears, and then press OK.
5 Press or repeatedly to select the resolution you want, and then press OK.
6 Press repeatedly until Select Function appears.
Adjusting the sharpness of a scanned image
To adjust the sharpness of a scanned image:
1 From the printer control panel, press System.
2 Press or repeatedly until Default Settings appears, and then press OK.
Scanning
82
To Next Page
Loading...
