Lexmark X560N - Light Colored Line, White Line, or Incorrectly Colored Line

Color has shifted outside of the appropriate area or has been superimposed over another color area.
• Remove and reinstall the print cartridges.
• Adjust the color registration:
1 From the printer control panel, press System.
2 Press or repeatedly until Admin appears, and then press OK.
3 Press or repeatedly until Maintenance appears, and then press OK.
4 Press or repeatedly until Adjust ColorRegi appears, and then press OK.
5 Press or repeatedly until Auto Correct appears, and then press OK.
6 Press or repeatedly until Yes appears, and then press OK.
The printer returns to the Select Function state.
Light colored line, white line, or incorrectly colored line
These are possible solutions. Try one or more of the following:
CLEAN THE LASER LENS
The laser lens may be dirty.
IS A PRINT CARTRIDGE DEFECTIVE?
Replace the print cartridge causing the line.
IS THE TRANSFER BELT DEFECTIVE?
Replace the transfer belt.
IS THE FUSER DEFECTIVE?
Replace the fuser.
Troubleshooting
185