Lexmark X560N - Setting the Scanned Image File Type; Customizing the Scan Settings for an Individual Scan Job; Customizing the Scan Settings When Scanning to E-Mail; Customizing the Scan Settings When Scanning to a Computer

5 Press or repeatedly to select the color mode you want, and then press OK.
6 Press repeatedly until Select Function appears.
Setting the scanned image file type
1 From the printer control panel, press System.
2 Press or repeatedly until Default Settings appears, and then press OK.
3 Press or repeatedly until Scan Defaults appears, and then press OK.
4 Press or repeatedly until File Format appears, and then press OK.
5 Press or repeatedly to select the file type you want, and then press OK.
6 Press repeatedly until Select Function appears.
Customizing the scan settings for an individual scan
job
Customizing the scan settings when scanning to e-mail
1 From the printer control panel, press E-mail.
2 Press or repeatedly until the scan setting you want appears, and then press OK.
3 Change the selected setting, and then press OK.
Customizing the scan settings when scanning to a computer
1 From the printer control panel, press Scan.
2 Press or repeatedly until the scan destination you want appears, and then press OK.
3 Press or repeatedly until the scan setting you want appears, and then press OK.
4 Change the selected setting, and then press OK.
Scanning
85