Lexmark X560N - Network Settings Menu

Network Settings menu
Menu item Description
Ethernet
Auto
10Base Half
10Base Full
100Base Half
100Base Full
Specifies the communication speed and the modes of Ethernet
Note: Auto is the factory default setting.
TCP/IP
Get IP Address
DHCP/Autonet
BOOTP
RARP
DHCP
Panel
IP Address
<enter IP Address>
Network Mask
<enter Network Mask>
Gateway Address
<enter Gateway Address>
Specifies the TCP/IP settings for the network
Note: DHCP/Autonet is the factory default setting.
Understanding printer menus
134