Customizing copy settings
Press or to access copy options while in copy mode.
Selecting a paper tray for copies
To select a paper tray other than the currently selected tray:
1 Load an original document faceup, short edge first into the ADF or facedown on the scanner glass.
Note: Do not load postcards, photos, small items, transparencies, photo paper, or thin media (such as magazine
clippings) into the ADF. Place these items on the scanner glass.
2 If you are loading a document into the ADF, adjust the paper guides.
3 From the printer control panel, press Copy.
4 Use the keypad to enter the number of copies.
5 To change the color mode, press Color Mode until the light comes on next to the selection you want. Choose
between B&W (black and white) and Color.
6 Press or repeatedly until Paper Supply appears, and then press OK.
7 Press or repeatedly to select Tray 1 (MPT), Tray 2, or Tray 3, and then press OK.
Note: Tray 3 is optional and may not be available.
8 Press Start to begin copying.
Collating copies
If you print multiple copies of a document, you can choose to print each copy as a set (collated) or to print the copies
as groups of pages (not collated).
Collated Not collated
1
1
2
2
3
3
1
1
2
2
3
3
1 Load an original document faceup, short edge first into the ADF or facedown on the scanner glass.
Note: Do not load postcards, photos, small items, transparencies, photo paper, or thin media (such as magazine
clippings) into the ADF. Place these items on the scanner glass.
2 If you are loading a document into the ADF, adjust the paper guides.
3 From the printer control panel, press Copy.
4 Use the keypad to enter the number of copies.
5 To change the color mode, press Color Mode until the light comes on next to the selection you want. Choose
between B&W (black and white) and Color.
6 Press or repeatedly until Collated appears, and then press OK.
7 Press or repeatedly until On appears, and then press OK.
8 Press Start to begin copying.
Copying
63
To Next Page
Loading...
