Replace Transfer Unit Soon
The transfer belt is nearly exhausted. Order a new transfer belt.
Restart Printer: 116-xxx
An unspecified printer error has occurred.
1 Turn the printer off.
2 Unplug the power cord from the wall outlet.
3 Check all cable connections.
4 Connect the power cord to a properly grounded outlet.
5 Turn the printer back on.
If the service message appears again, contact Customer Support, and report the message.
Restart Printer, 118-xxx
The Network Expansion Card is not installed correctly or is not working correctly due to damage or malfunction.
1 Turn the printer off.
2 Unplug the power cord from the wall outlet.
3 Reinstall the multi-protocol network card.
4 Check all cable connections.
5 Connect the power cord to a properly grounded outlet.
6 Turn the printer back on.
If the service message appears again, contact Customer Support, and report the message.
Scan Error
Error 116-xxx
Restart Printer
An unspecified printer error has occurred.
1 Turn the printer off.
2 Unplug the power cord from the wall outlet.
3 Check all cable connections.
4 Connect the power cord to a properly grounded outlet.
5 Turn the printer back on.
If the service message appears again, contact Customer Support, and report the message.
Scanner Lamp Error
Error 062-371
Understanding printer messages
157
To Next Page
Loading...
