5 Press or repeatedly until the menu item you want appears.
6 Press .
7 Press or repeatedly until the submenu item or the setting you want appears.
8 Press .
Note: Pressing
selects a setting. An asterisk (*) appears next to the selected setting.
9 To go into additional submenus and settings, repeat pressing or repeatedly until the submenu item or the
setting you want appears, and then press
.
10 If needed, press repeatedly to return to the previous menus and make other setting selections.
11 Press Start Color or Start Black.
Use this To
Quality
1
Adjust the quality of a scan.
Original Size
1
Specify the size of the original document.
1
Temporary setting. For information on saving temporary and other settings, see “Saving settings” on
page 120.
Related topics:
•
“Using the control panel” on page 109
Understanding the Photo Card menu
1 If necessary, press Photo Card, or insert a memory card or a flash drive into the printer.
2 Press or repeatedly until the menu item you want appears, and then press .
3 Press or repeatedly until the submenu item you want or the setting you want appears, and then press .
Note: Pressing
selects a setting. An * appears next to the selected setting.
4 To go into additional submenus and settings, repeat steps 2 and 3 as needed.
5 If necessary, press repeatedly to return to the previous menus and make other setting selections.
6 Press Start Color or Start Black.
Menu item Action
Proof Sheet Print and then scan a proof sheet:
• for all photos on the memory card
• for the most recent 20 photos
• by date
Print Photos Print photos directly from a memory card or flash drive.
1
Setting will return to factory default setting when a memory card or flash drive is removed.
2
Setting must be saved individually.
Understanding the printer
114
To Next Page
Loading...
