Menu Item Action
Paper Setup
1, 2
Specify the size and type of paper loaded.
Photo Size
1, 2
Specify the size of printed photos.
Note: If you did not specify the photo size beforehand in your digital camera,
the default photo sizes are:
• 4 x 6 (if Letter is your default Paper Size)
• 10 x 15 cm (if A4 is your default Paper Size, and your country is not
Japan)
• L (if A4 is your default Paper Size, and your country is Japan)
Layout
1
Center one photo on a page, or specify the number of photos to print on a
page.
Quality
1
Adjust the quality of printed photos.
1
Setting will return to factory default setting when the PictBridge-enabled digital camera is removed.
2
Setting must be saved individually.
Related topics:
•
“Using the control panel” on page 109
Understanding the Fax menu
To understand and use the Fax menu:
1 From the control panel, press Fax Mode.
The fax default screen appears.
2 If you do not want to change a setting, enter the fax number and then press Start Color or Start Black.
3 If you want to change a setting, press .
4 Press or repeatedly until the menu item you want appears, and then press .
5 Press or repeatedly until the submenu item you want or the setting you want appears, and then press .
Note:
Pressing
selects a setting. An asterisk (*) appears next to the selected setting.
6 To go into additional submenus and settings, repeat step 5 on page 117.
7 If needed, press repeatedly to return to the previous menus and make other setting selections.
8 Press Start Color or Start Black to send a fax.
The following table explains the function of each submenu or menu item in the Fax Menu.
Use this To
Quality
1
Adjust the quality of a fax you are sending.
Phone Book Add, edit, and print names and fax numbers of
individuals or groups.
1
Temporary setting. For information on saving temporary and other settings, see “Saving settings” on
page 120.
Understanding the printer
117
To Next Page
Loading...
