Only one photo/size selection can be chosen at a time
You have selected more than one option on step 2 of the photo proof sheet you printed and scanned.
1 Make sure you completely fill in only one circle for each option.
2 Press to continue.
Paper/Photo Size Error
There are one or more photos larger than the paper size you selected on the printer menu.
1 Press to clear the error message.
2 Press or repeatedly until Paper Setup appears on the display.
3 Press .
4 Press or repeatedly until Paper Size appears.
5 Press .
6 Press or repeatedly to select the paper size option that will fit your largest photo size.
7 Press Start Color or Start Black to begin printing.
Phone Line Busy
These are possible causes and solutions. Try one or more of the following:
Change redial settings
The printer automatically redials three times at 2-minute intervals. You can change the default settings to redial up
to five times at intervals up to 8 minutes.
To change the redial settings:
1 From the control panel, press Fax Mode.
2 Press .
3 Press or repeatedly until Fax Setup appears.
4 Press .
5 Press or repeatedly until Dialing and Sending appears.
6 Press .
7 To change the number of times the printer will redial:
a Press or repeatedly until Redial Attempts appears.
b Press .
c Press or repeatedly until the setting you want appears.
d Press .
8 To change the length of time between redials:
a Press or repeatedly until Redial Time appears.
b Press .
Troubleshooting
193
To Next Page
Loading...
