Lexmark X6570 - Customizing Settings Using the Fax Setup Utility

g If you want to enter additional numbers:
1 Press .
2 Repeat step c through step f.
Note: You can enter up to 50 phone numbers.
h If you do not want to enter additional numbers:
1 Press or repeatedly until No appears.
2 Press .
12 If you want to block all faxes that do not provide a Caller ID number:
a Press or repeatedly until Block No-ID appears.
b Press .
c Press or repeatedly until On appears.
d Press to save the setting.
13 If you want to print a list of blocked faxes:
a Press or repeatedly until Print appears.
b Press to print the list.
Customizing settings using the Fax Setup Utility
You can adjust the fax settings in the Fax Setup Utility. These settings apply to the faxes you send or receive.
1 From the Finder desktop, double-click the Lexmark 6500 Series folder.
2 Double-click the 6500 Series Fax Setup Utility icon.
3 From the Fax Setup Utility dialog, choose the printer from the Device pop-up menu.
Note: If you are using a network printer to send a fax, the MAC address of your printer is shown on the Device
pop-up menu. Otherwise, only the printer name is shown.
Faxing
84