Sending a fax
Entering a fax number
1 From the control panel, press Fax Mode.
2 Enter a fax number using:
The text box
Enter a fax number using the keypad.
Notes:
• You can include a calling card number as part of the fax number.
• Enter a maximum of 64 digits in a fax number, which can include the
symbols * or #.
• Press Redial / Pause to insert a three-second pause in a number
you are entering to wait for an outside line or get through an
automated answering system.
Speed Dial or Group Dial
a Press Phone Book.
b Enter Speed Dial and/or Group Dial numbers.
• Press or repeatedly until the Speed Dial or Group Dial
number you want appears.
• Use the keypad to enter the number of the Speed Dial entry (1–
89) or Group Dial entry (90–99).
Notes:
• For instructions on how to add Speed Dial or Group Dial numbers
using the computer, see “Setting up Speed Dial using the
computer” on page 77.
• For instructions on how to add Speed Dial or Group Dial numbers
using the control panel, see “Using the control panel Phone
Book” on page 77.
3 If you want to send a fax to a group of numbers (broadcast fax):
a Press .
b Repeat entering fax numbers, using any combination of the previous methods, until a maximum of 30 fax
numbers have been entered.
Sending a fax using the control panel
Make sure the printer is on.
1 Load an original document facedown on the scanner glass.
2 From the control panel, press Fax Mode.
Faxing
72
To Next Page
Loading...
