9 Press or repeatedly until the setting you want appears.
10 Press to print the report.
Blocking unwanted changes to fax settings
This feature blocks network users from changing fax settings.
1 From the control panel, press Settings.
2 Press or repeatedly until Device Setup appears.
3 Press .
4 Press or repeatedly until Host Fax Settings appears.
5 Press .
6 Press or until Block appears.
7 Press .
Blocking junk faxes
If you have Caller ID, you can block faxes sent from specific numbers and/or all faxes which do not include a Caller
ID number.
1 From the control panel, press Fax Mode.
2 Press .
3 Press or repeatedly until Fax Setup appears.
4 Press .
5 Press or repeatedly until Fax Blocking appears.
6 Press .
7 Press or repeatedly until Turn ON/OFF appears.
8 Press .
9 Press or repeatedly until On appears.
10 Press .
11 If you want to block faxes from specific phone numbers:
a Press or repeatedly until Add appears.
b Press .
c Enter a phone number.
Note: You can enter a maximum of 64 numbers.
d Press .
e If you want to enter a corresponding name, enter it using the keypad buttons.
f Press .
Faxing
83
To Next Page
Loading...
