Lexmark X6570 - Working with Photos Using the Control Panel

Removing a memory card or flash drive
A memory card or a flash drive has to be properly removed from the printer to avoid corruption of the device or loss
of stored data.
Warning: Do not remove a memory device from the printer while actively printing, reading, or writing from it.
If the printer is connected to the computer through a USB cable:
1 Click on the Finder desktop, and then drag it to the trash icon on the dock.
2 Remove the memory card or flash drive.
If the printer is connected to the computer through a wireless network, and you are using the Network Card Reader
to view and download photos from the memory device:
1 Click .
2 Remove the memory card or flash drive.
Working with photos using the control panel
Printing all photos
1 Load photo paper with the glossy or printable side facing you. (If you are not sure which side is the printable
side, see the instructions that came with the paper.) For more information, see “Loading paper” on page 17.
2 Insert a memory card or flash drive that contains the images you want to print. For more information, see
“Inserting a memory card” on page 87 or “Inserting a flash drive” on page 88.
3 Press or repeatedly until Print Photos appears.
4 Press .
5 Press or repeatedly until Print All Photos appears.
6 Press Start Color or Start Black.
The print settings used on the print job are displayed sequentially on the second line of the display.
7 Press Start Color or Start Black again.
Related topics:
• “Using the control panel” on page 109
Printing photos stored on the memory device using the proof sheet
1 Load plain letter- or A4-size paper.
2 Insert a memory card or flash drive that contains the images you want to print.
3 Press or repeatedly until Proof Sheet appears.
4 Press .
5 Press or repeatedly until Print Proof Sheet appears.
Working with photos
90