The print cartridge carrier moves and stops at the loading position, unless the printer is busy.
3 Press down on the cartridge carrier latch to raise the cartridge carrier lid.
4 Remove the used print cartridge.
Note: If you are removing both cartridges, repeat step 3 and step 4 for the second cartridge.
Related topics:
• “Installing print cartridges” on page 133
Aligning print cartridges
1 Load plain paper.
2 From the control panel, press Settings.
3 Press or repeatedly until Maintenance appears.
4 Press .
5 Press or repeatedly until Align Cartridges appears.
6 Press .
An alignment page prints.
If you aligned the cartridges to improve print quality, print your document again. If print quality has not improved,
clean the print cartridge nozzles.
Related topics:
• “Cleaning the print cartridge nozzles” on page 136
• “Wiping the print cartridge nozzles and contacts” on page 136
• “Preserving the print cartridges” on page 137
• “Improving print quality” on page 138
Maintaining the printer
135
To Next Page
Loading...
