Lexmark X6570 - Enlarging or Reducing an Image; Adjusting Copy Quality

12 Press .
13 Press or repeatedly until the size you want appears.
14 Press .
15 Press or repeatedly until Paper Type appears.
16 Press .
17 Press or repeatedly until either Automatic or Photo appears.
18 Press .
19 Press Start Color or Start Black.
Related topics:
• “Understanding the Copy menu” on page 112
Enlarging or reducing an image
1 Load paper.
Note: If you are copying photos, use photo or heavyweight matte paper, with the glossy or printable side facing
you. (If you are not sure which side is the printable side, see the instructions that came with the paper.)
2 Load an original document or photo facedown on the scanner glass.
3 From the control panel, press Copy Mode.
4 Press .
5 Press or repeatedly until Resize appears.
6 Press .
7 Press or repeatedly until the setting you want appears.
Notes:
• If you select Custom Resize, press and hold or until the size you want appears and press .
• If you select Borderless, the printer will reduce or enlarge the document or photo as necessary to print a
borderless copy on the paper size you have selected. For best results with this resize setting, use photo
paper and set the paper type selection to Automatic or Photo.
8 Press Start Color or Start Black.
Related topics:
• “Loading original documents on the scanner glass” on page 33
• “Using the control panel” on page 109
Adjusting copy quality
Quality specifies the resolution used for the copy job. Resolution involves a dots-per-inch (dpi) count; the higher the
dpi count, the higher the resolution and copy quality.
1 Load paper.
2 Load an original document facedown on the scanner glass.
Copying
38