Canceling a scan job
To cancel a scan using the control panel:
1 Press .
Scanning stops and the scanner bar returns to its home position.
2 Press to turn off the printer.
To cancel a scan using the software:
1 From the Finder desktop, double-click the Lexmark 6500 Series folder.
2 Double-click the Lexmark 6500 Series Center icon.
3 From the Progress dialog, click Cancel.
Related topics:
• “Using the control panel” on page 109
Scanning over a network
Setting a network printer to scan
Assigning a name to your computer
You can assign a name to your computer when you install the printer software for the first time. Choose this name
when you scan an item on the network printer and want to send the scanned image to your computer. The name of
the computer can be changed, as needed.
1 From the Finder desktop, double-click the Lexmark 6500 Series folder.
2 Double-click the Lexmark 6500 Series Center icon.
3 From the menu, choose Advanced Network Scan Settings.
4 In the Computer Name field, type in the name of your computer.
5 Click Save.
Related topics:
•
“Setting a “scan to network” PIN” on page 57
Setting a “scan to network” PIN
Assigning a “scan to network” PIN lets you control the sending of scanned items to your computer. You can assign
a “scan to network” PIN when you install the printer software for the first time. You can also change it as needed.
1 From the Finder desktop, double-click the Lexmark 6500 Series folder.
2 Double-click the Lexmark 6500 Series Center icon.
3 From the menu, choose Advanced Network Scan Settings.
4 Select the check box to specify a PIN.
5 Type in a four-digit PIN. Use a combination of numbers from 1-9.
6 Click Save.
Scanning
57
To Next Page
Loading...
