5 Press or repeatedly until Quality appears.
6 Press .
7 Press or repeatedly until Photo appears.
8 Press .
9 Press or repeatedly until Paper Setup appears.
10 Press .
11 Press or repeatedly until Paper Size appears.
12 Press .
13 Press or repeatedly until the size you want appears.
14 Press .
15 Press or repeatedly until Paper Type appears.
16 Press .
17 Press or repeatedly until the type of paper loaded into the printer appears.
18 Press .
19 Press Start Color or Start Black.
Related topics:
• “Using the control panel” on page 109
Making borderless copies using the control panel
1 Load photo paper with the glossy or printable side facing you. (If you are not sure which side is the printable
side, see the instructions that came with the paper.)
2 Place a photo facedown on the scanner glass in the lower right corner. For more information, see “Loading
original documents on the scanner glass” on page 33.
3 From the control panel, press Copy Mode.
4 Press .
5 Press or repeatedly until Resize appears.
6 Press .
7 Press or repeatedly until Borderless appears.
8 Press .
9 Press or repeatedly until Paper Setup appears.
10 Press .
11 Press or repeatedly until Paper Size appears.
Copying
37
To Next Page
Loading...
