4 Remove the tape from the back and bottom of the color cartridge, and insert the cartridge in the right carrier.
Warning: Do not touch the gold contact area on the back or the metal nozzles on the bottom of the cartridge.
5 Close the color cartridge carrier lid.
6 Close the scanner unit, making sure to keep your hands out from underneath the scanner unit.
The control panel display will prompt you to load paper and press to print an alignment page.
Note: The scanner unit must be closed to start a new scan, print, copy, or fax job.
Related topics:
• “Removing a used print cartridge” on page 134
• “Aligning print cartridges” on page 135
Removing a used print cartridge
1 Make sure the printer is on.
2 Lift the scanner unit.
Maintaining the printer
134
To Next Page
Loading...
