5 Press .
If you set a PIN during network setup and are being asked for it:
a Enter the PIN using the keypad on the control panel.
b Press .
The Network Card Reader dialog appears on the computer screen.
To adjust settings for the Network Card Reader:
1 Choose Lexmark Network Card Reader Preferences.
2 If necessary, click General.
3 Choose whether to show a notification dialog whenever a memory device is inserted into the printer.
4 Click Settings.
5 Assign a name to your computer.
6 Choose whether to specify a PIN to be able to access to your computer.
Note: The PIN should be a combination of four digits from 1–9.
7 Click Apply.
These buttons are at the bottom of the Network Card Reader dialog:
Click To
+ Add a network printer to the list.
– Remove a network printer from the list.
Connect to a network printer on the list.
Disconnect from a network printer on the list.
Adjust the size of the thumbnail/s on the Network Card Reader dialog.
Go to the Help Center to find more information.
Save Save the selected images on your computer.
Understanding the printer
130
To Next Page
Loading...
