7 Use the keypad to select the number of copies you want.
8 Press .
9 Press or repeatedly until Collate appears.
10 Press .
11 Press or repeatedly until On appears.
12 Press .
13 Press Start Color or Start Black.
If you are using the scanner glass, a message appears prompting you for additional pages.
a If necessary, press or repeatedly until Yes appears.
b Load the next page of the original document facedown on the scanner glass, and then press .
c Repeat step a and step b until:
• All the pages you want to copy have been saved to the printer memory. Then press Start Color or Start
Black.
or
• The memory has run out of space.
The printer automatically prints the copied pages. The last page copied is printed first.
You can then scan the remaining pages.
Related topics:
• “Making a copy” on page 36
• “Collating copies using the computer” on page 22
• “Using the control panel” on page 109
Copying on both sides of the paper using the scanner glass
The printer has a built-in duplex unit that lets you copy on both sides of the paper.
Note: For two-sided copying, use only plain paper in letter or A4 size. Do not make two-sided copies on envelopes,
card stock, or photo paper.
1 Load paper.
2 Load an original document facedown on the scanner glass.
3 Make sure the light is on.
4 From the control panel, press Copy Mode.
5 Adjust the copy settings.
Note: If you are copying a two-sided original document, press the
button, and select the menu item 2-Sided
Original.
6 Press to save your settings temporarily.
7 Press .
The printer scans the first page of the original document. A page prints, and then is pulled back into the printer.
CAUTION: Do not touch the paper while the printer is actively printing.
Copying
40
To Next Page
Loading...
